Get a FREE Brewsy Bag with every order! (limited time only) ---- Free shipping over $59! ----
Blackberry Wine

Blackberry Wine

Do you like the taste of blackberries? If you do, then you'll love this delicious blackberry wine recipe! The dry, tannic taste of blackberries combine together to make an incredibly unique wine.

You can make it either sweet or dry. If you choose to make it dry, try pairing it with some bread, jam, and brie. If you choose to make it sweet, it makes a fantastic after-dinner treat.

So gather up some blackberries (frozen or fresh is fine!) and we'll get started with this classic summer favorite.

All the Equipment You’ll Need

First, you’ll need a 2 gallon bucket, or a glass 1 gallon carboy — this is where you'll store your blackberry wine while it ferments. If you don't have a glass carboy, any food-grade, sanitized gallon container will work.

You’ll also need an airlock and rubber stopper, which will make sure that carbonation can escape from your mead while it is fermenting, but also prevent anything bad from getting into your mead. You can grab all of this in a winemaking starter kit.

Preparing Your Blackberries

Now that you know a little bit about the history of strawberry wine and what equipment to use, let's move on to the recipe. This delicious blackberry wine recipe will yield about one gallon, or 4 standard-sized wine bottles, of delicious blackberry wine.

If your blackberries are frozen, thaw them first in a large pot. If they're fresh, wash your berries well, and remove the any stems. If there are any moldy ones, be sure to remove those and discard them.

Then, once thawed, place the berries in a large pot or bowl and crush them with a spoon or potato masher. Add the sugar and hot water, and stir well.

Step 3: Preparing for Fermentation

If you're fermenting your blackberry wine in a glass gallon jug, you'll likely want to strain out some of the blackberry mash. That way, you can easily stir your wine when it's fermenting.

You can use a cheesecloth to strain out some of the seeds (it's fine if you'd like to keep some in), and then, make sure there's at least 4 inches of space for headroom in your fermentation vessel. If there isn't, pour out a bit of the juice to avoid overflowing during fermentation.

Next, in order to start the fermentation process, you’ll need a wine yeast. In this recipe, we use the brewsy bag, which is a combination of an industry-exclusive wine yeast, nutrients for healthy yeast, energizer for a quick and hearty fermentation, potassium bicarbonate (to reduce strong, acidic flavors), malolactic culture (to make your wine smoother) and bentonite (a clarifier for sparkling clear wine). It's the only way to ensure that you have a reliably strong and successful fermentation.

Add an entire Brewsy bag in, and pop on your airlock on top (making sure it's full of water).

Step 4: Fermentation

Your blackberry wine will start to ferment within 24 to 48 hours, and will continue doing so for about 5 to 7 days(sometimes longer). You'll know it's done when the bubbling has slowed down significantly (fermentation creates carbon dioxide, which causes bubbling in the airlock), or when it starts to taste a bit dry.

When in doubt, taste-test your blackberry wine for sweetness, and then go onto the next step when your it tastes dry enough for your liking. If it still tastes too sweet, let it keep fermenting for several more days until it tastes more dry.

Step 5: Filtering Your Wine

Once the bubbling has slowed down significantly, it's time to get rid of the lees (that's the sediment that has settled at the bottom of your carboy) and prep your wine to be enjoyed!

We definitely don't want any yeasty particles in our wine, so we're going to get rid of them by first forcing any leftover yeasty bits to the bottom of the container.

A great way to do this it simply to pop your wine in the fridge! Keep it in there for at least two days. The cold forces any leftover particles to fall to the bottom of your container.

After that, you'll need to filter (or 'rack') your wine. To do this, simply pour your wine off of the lees (all that cloudy sediment that will show up at the bottom) at into another container. You can also grab a siphon for a totally mess-free transfer (which can be tricky if you're not used to it, but super effective!)

Optionally, you might want to use a clarifying agent, which works on the molecular level to bind to small particles in your mead — particles that might lead to yeasty, bitter flavors. Every Brewsy kit comes with a clarifying agent to rid your wine of any off-flavors and make it sparkling clear.

Step 6: Bottling Your Blackberry Wine

Many winemakers believe that aging helps to bring out the subtle flavors in the fruit, resulting in a more delicious final product. But some people prefer the bright flavor of young strawberry wine!

We recommend having a glass now, and saving a few bottles for later (this recipe will yield 4 750mL regular-sized wine bottles). You can compare the taste of younger and aged wine, and see which one you like better!

The most common complain we hear about strawberry wine is that it sometimes comes out too dry. Don't worry, it will get better with time. But, if yours seems to lack flavor, you'll want to backsweeten it by making a simple syrup.

We hope you enjoyed this recipe for strawberry wine! Ready to get started? Grab a Brewsy winemaking kit, which has all the tools you need to guarantee delicious and reliable strawberry wine (or cyser or whatever you'd like!) every time you make it! (and use code FRUIT15 for 15% off, too).

star

Blog posts